Performance steps
1. Link with the tap-water pipe, fill water into the barrel, dilute the cleanser in propotion.
2. Make sure the car is at rest.
3. Fill the cleanser in to the bucket and put it in the native machine.
4. Find out the vitta of the heating apparatus linked with the engine and the vitta in the car, disassemble the joint and then link with proper auxiliary joint.
5. Link the red and blue vitta to the auxiliary joint, and the downcomer to the blue outlet oil vitta "PRESSURE", and join the red one to the "RETURN"joined with the vitta in the car.
6. Link the compressed air to the nvtive machine.
7. Turn the switching valve to "RECYCLE"
8. Open the pressure cap, if it`s linked to the vitta of the car, this step can be skipped over.
9. Revolve the pressure regulating valve to gain pressure of 4 liters or so.
10. Now the cleanser enters then car and begins cleaning.
11. After cleaning, turn the pressure regulating valve to: "RETURN", close it and disassemble the auxiliary joint, then return to the cool off section, fill with new water from the water tank, and end the rinsing.
12. If there`s much scale in the water tank, then the vitta can be linked, link the downcomer with the blue vitta, oper the pressure cap and start the cleaning machine to discharge the scale from the water tank. After the scale is cleaned out, link the upcomer and the red return pipe, and begin circulation cleaning.